SKU: 14507221823

Metabo BH 18 LTX BL 16 Akku Bohrhammer 18 V 1.3 J SDS-plus Brushless + 1x Akku 8,0 Ah + MetaBOX - ohne Ladegerät

$159.56 $177.29
Save 10%
No.2 Bestseller on artteomagazin.sk >

Pay in installments of $44.32 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Sep 2 - Sep 7

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Metabo BH 18 LTX BL 16 Akku Bohrhammer 18 V 1.3 J SDS-plus Brushless + 1x Akku 8,0 Ah + MetaBOX - ohne LadegerätLieferumfang: 1x Akku Bohrhammer BH 18 LTX BL 16 1x Zusatzhandgriff 1x Bohrtiefenanschlag 1x metaBOX 145L 1x Metabo LiHD Akkupack 18 V 8,0 Ah Li Ion Akku ( 625369000 ) CAS System ohne Ladegert Produktbeschreibung: Der Akku Hammer BH 18 LTX BL 16 mit SDS plus Werkzeugaufnahme ist ein sehr leichter, kompakter Akkuhammer der durch seinen Brushless Motor und die Metabo Vibratechh (MTV) fr ermdungsarmes und gesundheitsschonendes Arbeiten sorgt, auch im

Lieferumfang:

- 1x Akku Bohrhammer BH 18 LTX BL 16
- 1x Zusatzhandgriff
- 1x Bohrtiefenanschlag
- 1x metaBOX 145L
- 1x Metabo LiHD Akkupack 18 V 8,0 Ah Li-Ion Akku ( 625369000 ) CAS System
- ohne Ladegerät

Produktbeschreibung:

Der Akku-Hammer BH 18 LTX BL 16 mit SDS-plus Werkzeugaufnahme ist ein sehr leichter, kompakter Akkuhammer der durch seinen Brushless-Motor und die Metabo Vibratechh (MTV) für ermüdungsarmes und gesundheitsschonendes Arbeiten sorgt, auch im Dauereinsatz. Die Brushless Technologie und das Hochleistungsschlagwerk sorgen außerdem für maximale Bohrleistung, Effizienz und Lebensdauer. Die integrierte Vario-Tacho-Constamatic (VTC)-Vollwellenelektronik untersützt das Arbeiten mit materialgerechten Drehzahlen, die unter Last konstant bleiben. Sein LED Arbeitslicht unterstützt dabei die Sicht auf die Bohrstelle. Der Bohrhammer verfügt über die zwei Funktionen Hammerbohren und Bohren. Zur eigenen Sicherheit verfügt der Bohrhammer über eine elektronische Sicherheitsabschaltung beim Blockieren des Einsatzwerkzeugs. Der Metabo BH 18 LTX BL 16 eignet sich ideal für das Bohren in Stein und Beton kann aber auch für Stemmarbeiten oder das Entfernen von Fliesen verwendet werden. Metabo ist ein renommierter Anbieter für Elektrowerkzeuge und steht für hochwertige Qualitätsprodukte "von Profis für Profis".

Technische Daten:

Hersteller: Metabo
Herstellerbezeichnung: BH 18 LTX BL 16
Herstellernummer: 600324840
Akkuspannung: 18V
Max. Einzelschlagenergie (EPTA): 1.3 J
Max. Schlagzahl: 5250 / min
Bohr-Ø Beton mit Hammerbohrern: 16 mm
Bohr-Ø Mauerwerk mit Bohrkronen: 68 mm
Bohr-Ø  Stahl: 13 mm
Bohr-Ø  Weichholz: 20 mm
Leerlaufdrehzahl: 0 - 730 /min
Werkzeugaufnahme: SDS-plus
Gewicht (mit Akkupack): 1.9 kg
Vibration Hammerbohren Beton: 12.7 m/s²
Vibration Messunsicherheit K: 1.5 m/s²
Geräuschemission Schalldruckpegel: 87 dB(A)
Geräuschemission Schallleistungspegel (LwA): 98 db(A)
Geräuschemission Messunsicherheit K: 3 dB(A)


Bei gewerblicher Nutzung beachten Sie bitte die Bauvorschriften!

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 14507221823

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.4 ★★★★★
Based on 23 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
T
Verified Purchase
Talagand
Lake Worth, US
★★★★★ 4
Reasonably adequate room divider
Size: 4 Panel-88'', Color: Beige
I'm reviewing this as I assemble it. Couple things: 1. I didn't expect as much assembly. I've ordered dividers before and they more-or-less came as one unit. Sometimes the panels needed screwing together. These require complete assembly and come largely as three rods: two make up vertical columns and snap together. Another one (called part "C") makes the horizontal columns and you have two of these per panel (one attaches to part "A" and the other part "B"). These parts are metal with a plastic shim. Using the wood screws to attach to part "C" is a real pain in the neck. There's not much holding the panel in place so it's a little tricky. One tactic I've found while I'm assembling that works for the initial connections from parts A and B to their respective "C" rods is to hold the screw in place with a screw driver and then rotating the rod around the screw. This will do a number on your hands if you aren't wearing gloves. This obviously doesn't work when completing the connection. Using a driller driver on this is really near impossible because there isn't anything you can use to secure it in place. You can use it on the first panel, but as it gets longer, it becomes increasingly difficult and because it isn't wood, it's really tight. I considered drilling larger pilot holes but since there are only 4x4=16 screws I need to screw in, I just decided to use my screw driver to complete it. 2. Also related to assembly. When completing the panels (attaching parts "A" and "B" to parts "C" that have the cloth cover on it), you have to be careful that when you tighten that side that it isn't loosening the other side. Because the pilot holes are so tight, you can end up rotating the rod, which rotates it in the same direction as looser on the original side. Having someone hold the "C" rod in place while you screw it in is probably the easiest approach. I didn't have a 2nd person, so I just had to keep flipping back and forth and tightening both sides as I screwed it in. Not the worlds biggest deal, but annoying nonetheless. 3. The way the instructions are written, they seem to suggest building this thing progressively; that is, you do panel 1, then 2, connect them together, then do 3 and connect it, etc. I took a different route that I suspect saved me quite a bit of trouble, and I assembled all four panels first and THEN connected everything together. 4. For the love of God make sure you check that the plastic tip is on the same side for every panel. Otherwise, you have to take one side apart again and reverse it. On the bright side, if this happens, you've essentially bored out the pilot holes to be the correct size... which is having me question if I shouldn't have just bored them out to the appropriate width in the first place. 5. Attaching all of the panels together is also an enormous pain in the ass unless you happen to have an 88" long elevated surface. Attaching the legs either requires you to elevate one side, which will invariably twist the inexplicably cheap material in the bottom connectors... or you can attach them sideways... or you can put this thing upright, having two people hold the panels in place while you use the allen wrench to tighten the bolts on the underside. None of those are particularly great options. NOW on to the utility itself. 1. The panels do let some light through (I didn't believe their advertising, and that was one of the reasons that I bought beige, is that I wanted it to not be too dark). They aren't transparent though, so it isn't that far off from their description. They functionally work great, and keep the mess of wires hidden and when I'm sitting at my desk, actually reflect quite a bit of light into my office. Great! 2. My wife has described these as "the most hideous piece of furniture ever conceived of by man." So it does not have spouse approval factor. Granted, she will seldom be in my office area, so that isn't the end of the world. 3. These are really hard to align in a way that doesn't look a little tacky. There are some plastic connectors but they don't do a bang up job of keeping these in place. Each panel is slightly tilted and it's... quite obvious. I may at some point make my own improvements to these to help make them more level. It's not a particularly expensive product so I wasn't expecting much so it's fine and I'm not going to ding them on the rating because of it. All said, would I buy this product again? Probably not. It's assembly was ~90 minutes which is about 75 minutes longer than I was anticipating spending on this (not including the 5 minute writeup that I'm doing here). But am I going to return it? Also no, if for no other reason I'd be just as annoyed taking it apart and putting it in the original box to return it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 31, 2023
M
Verified Purchase
Martha Jeane
Grantham, US
★★★★★ 5
Great for using behind me on Zoom calls
Color: Black, Size: 1 Large Panel
This works great as a place to put tapestries behind me when I'm on Zoom calls... much nicer than blurring out the background. Easy to put together, large, works great.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 16, 2026
W
Verified Purchase
Waiting to see how good it is
Draper, US
★★★★★ 5
Good quality, very adorable solution.
Color: Black, Size: 1 Large Panel
Easy to put together and take apart. Wish it had a storage bag of some sort—that would be very helpful. Used it for our mom while she was on hospice at home. The wheels made it very easy to move around as necessary. Nice and tall and wide for privacy. Highly recommend.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 7, 2025
A
Verified Purchase
Andrew Hopkins
Louisville, US
★★★★★ 4
Nice, large room divider for privacy
Color: Black, Size: 1 Large Panel
Easy to assemble. Fabric screen covers the large frame very well and provides privacy by separating spaces. I would not exactly call it sturdy, but it does the job and stands freely with no problem. It’s lightweight and portable if you need to move it. Came with a screwdriver and wrench tool for assembly.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 7, 2026
Z
Verified Purchase
Zee
Lowell, US
★★★★★ 5
Solid divider
Color: Black, Size: 1 Large Panel
Easy to assemble, is not see through and seems sturdy. The optional wheels are a nice touch.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 18, 2026

recommand products

27 x 80 mm Wacker Grabspaten 75 x 400 mm
62.97
25 x 75 mm 4-kt. Flachspaten 120 x 400 mm
50.96
Breitmeissel (quer) 410 mm für Arrowhead S10
153.27
27 x 80 mm Wacker Spitzmeißel 400 mm
35.32
Asphaltspaten (parallel) 440 mm für Arrowhead S10
153.27